項目名稱：南昌聯發·萬科海上明月示范區展示中心照明工程

　　此項目為2021阿拉丁神燈獎工程類參評項目

　　申報單位：北京光影國際照明設計

　　項目地址：江西省南昌市高新開發區艾溪湖

　　設計單位：北京光影國際照明設計

　　施工單位：文業照明有限公司

　　業主單位：南昌聯萬置業有限公司

　　項目簡介

　　融情于景，融匠心于建筑。本案是集售樓處、商業、辦公為一體的綜合業態組合社區項目，將打造為“高新區海上系 2020 濱水生活花園”的城市理想生活。售樓處建筑極具標識度，以海上明月為主題，核心理念是將“明月”、“湖水”與既有的建筑、景觀等相結合。因此建筑設計中延續明月的概念，深化明月的形態，形成了擁有不同明月景致的建筑群。還原生活中波光月色的自然景致，月光倒映在湖水中，將具象景致轉化為設計符號，便形成了半月式的入口門洞與水波幕墻。示范區設計通過建筑細節的處理和用材的選擇，將體塊之間的關系和比例詮釋得更加鮮明。入口處選用仿木色圓形穿孔鋁板，以此增加項目的標識性。北立面以入口處為設計中心點，半月式的門洞和流水式的玻璃幕墻相結合，仿佛月光慢慢升起。在建筑幕墻設計中，東側沿湖立面在建筑分隔處設置了兩半月亮為趣味造型，緊密結合建筑空間的設計主題，將月色中的“實”巧妙運用于建筑立面中，打破幕墻的平整及單調性，豐富了幕墻結構層次。設置的觀景臺，不僅呼應了社區月亮主題，也隱隱在邀請行人駐足觀賞。
Melt in the scene, melt craftsmanship in the building. This project is a comprehensive business form combination community project integrating sales office, business and office, which will be built into an urban ideal life of "Hi-tech Zone Marine System 2020 Waterfront Life Garden". The sales office building is highly marked, with the sea moon as the theme, the core idea is to combine the "moon", "lake" and the existing buildings, landscape, etc.

　　照明技術指標

　　線條燈：功率18W 色溫RGBW 數量221米
高效投光燈：功率36W 色溫3000K 數量2套
洗墻燈：功率12W 色溫2700K 數量10套
定制自發光燈具（大款）：功率9W 色溫2700K 數量15套
定制自發光燈具（中款）：功率6W 色溫2700K 數量22套
定制自發光燈具（小款）：功率3W 色溫2700K 數量25套

供配電系統
1．本工程為220/380V供配電系統，采用放射式供電方式；
2．計量：夜景照明配電系統均在上級配電箱（柜）進行計量；
導線選擇和線路敷設
所有供配電線路和控制線路必須按設計規范要求穿厚壁熱鍍鋅鋼管或金屬線槽敷設，任何地方都不能出現裸導線的情況，更不能把供電線路直接埋在地面和墻體內；
2. 照明線路采用WDZB-YJY-1.0KV銅芯無鹵低煙B級阻燃交聯聚乙烯絕緣電力電纜；低壓線路采用ZR-RVV阻燃銅芯電纜；
3. 電纜分支或有破開處須設防水接線盒并離地0.3m安裝；敷設管線應在適當位置加拉線盒（直線：30m，一個彎：20m，二個彎：15m，三個彎：8m）；4.管線埋地敷設時埋地深度不小于0.7m，在寒冷地區電纜宜埋設于凍土層以下；所有穿過建筑物伸縮縫、沉降縫、后澆帶的管線應按《建筑電氣安裝工程圖集》中有關作法施工；
設備要求：
1）照明設備所有帶電部分應采用絕緣、遮攔或外護物保護，距地面2.8m以下的照明設備應使用工具才能打開外殼進行光源維護；
2）室外安裝照明配電箱與控制箱等應采用防水、防塵型，防護等級不應低于IP54；
3）室外配電箱內元器件應考慮室外環境溫度、濕度的影響，距地面2.8m以下的電氣設備應借助于鑰匙或工具才能開啟；
4）LED燈具應選用專用開關電源，LED燈具輸入電壓應與開關電源輸出電壓一致；
5）在正常視角范圍內的光源可直視燈具，必須采取有效防眩光措施；
6）對人員可觸及的照明設備，當表面高于60℃時，必須采用隔離保護措施；
7）燈具、附件及電氣設備滿足項目所在地氣候環境條件下正常工作；
8）夜景照明燈具防護等級必須滿足消防安全要求；室外雨棚嵌入式筒燈防護等級不低于IP44,水下燈防護等級不低于IP68等；
9)所有I類燈具均設置地線接地保護;
10)燈具功率因數不應低于0.9，以減少線路損失，確保供電質量及光源效率.
時間控制器系統要求：
1）開、關時間任意可調；
2） 已調好的開、關時間不受停電影響，自動記憶；
3）每天可做十次開、關動作，開、關時間一周內可任意編程；
4）可自動，也可手動控制，設有自動保護裝置；
5）內消耗功率低；
施工安裝要求：
1）夜景照明燈具及配套電器、開關電源、控制器等電氣設備禁止安裝在可燃材料表面；
2）開關電源、各種控制器必須按照施工設計規范要求安裝在金屬外殼的箱體內，不得埋在地面和墻體內；
3）燈具的電纜電線接頭應端子連接或涮錫連接、并做防水處理；
4）為了保證安裝強度和防止雨水腐蝕，燈具安裝支架、固定螺絲應全部為不銹鋼或鋁合金材質；
5）燈具、管線及電氣設備布置不得影響消防安全疏散與救援；
6）室外燈具外殼顏色應與安裝部位表面顏色協調；外立面夜景照明燈具及布線應做到不外露、不易觸碰到，主立面嚴禁外露；
7）所有供配電線路和控制線路必須按設計規范要求穿厚壁熱鍍鋅鋼管或金屬線槽敷設，任何地方都不能出現裸導線的地方，亦不可直埋于地面或者墻體內；
8）施工滿足項目所在地的地方標準及施工規范要求；

Line light: power 18W color temperature RGBW quantity 221 meters

High efficiency light projection lamp: power 36W color temperature 3000K quantity 2 sets

Wall washing lamp: power 12W, color temperature 2700K, quantity 10 sets

Customized self-illuminating lamps (large model) : power 9W color temperature 2700K number of 15 sets

Customized self-illuminating lamps (dle style) : power 6W color temperature 2700K quantity 22 sets

Customized self-illuminating lamps (small) : power 3W, color temperature 2700K, quantity 25 sets



Power supply system

1. This project is 220/380V power supply and distribution system, using radiation power supply mode;

2. Metering: Nightview lighting distribution system are measured in the superior distribution box (cabinet);

Conductor ion and circuit laying

All power supply and distribution lines and control lines must be laid through thick wall hot dip galvanized steel pipe or metal trough according to the requirements of the design specification. Bare wires can not appear anywhere, let alone the power supply lines directly buried in the ground and walls;

2. The lighting line adopts WDZB-YJY-1.0kV copper core halogen-free low-smoke B-grade flame retardant XLPE insulated power cable; ZR-RVV flame retardant copper core cable for low voltage line;

3. Water proof junction box shall be set up at cable branch or broken place and shall be installed 0.3m above the ground; The pipeline should be laid in the appropriate position of the wire box (straight line: 30m, one bend: 20m, two bend: 15m, three bend: 8m); 4. The buried depth of the pipeline should not be less than 0.7m when it is laid in ground. In cold areas, the cable should be buried under the permafrost; All the pipelines through the expansion joints, settlement joints and post-cast belts of the building shall be constructed according to the relevant practices in the Atlas of Building Electrical Installation Engineering;

Equipment requirements:

1) All live parts of the lighting equipment should be protected by insulation, shielding or external protection. The lighting equipment below 2.8m the ground should use tools to open the shell for light source maintenance;

2) Outdoor lighting distribution box and control box should be waterproof and dustproof, and the protection grade should not be lower than IP54;

3) The components in the outdoor distribution box should consider the influence of outdoor environment temperature and huity, and the electrical equipment below 2.8m the ground should be opened with the help of keys or tools;

4) LED lamps should use special switching power supply, and the input voltage of LED lamps should be consistent with the output voltage of the switching power supply;

5) The light source within the normal viewing Angle can look directly at the lamp, and effective anti-glare measures must be taken;

6) For lighting equipment accessible to personnel, when the surface is higher than 60℃, isolation protection measures must be adopted;

7) The lamps, accessories and electrical equipment should work normally under the climatic and environmental conditions of the project location;

8) The protection level of nightview lighting fixtures must meet the fire safety requirements; The protection level of outdoor canopy embedded downlight should not be lower than IP44, and the protection level of underwater light should not be lower than IP68;

9) All Class I lamps are equipped with ground wire grounding protection;

10) The power factor of the lamp should not be less than 0.9 to reduce the line loss and ensure the quality of power supply and the efficiency of the light source.

Time controller system requirements:

1) Opening and closing time can be adjusted;

2) The adjusted on and off time is not affected by power failure, and it can be automatically remembered;

3) Can do 10 times a day on and off action, on and off time within a week can be arbitrary programming;

4) It can be controlled automatically or manually, and equipped with automatic protection device;

5) Low internal power consumption;

Construction and installation requirements:

1) Nightview lighting lamps and supporting electrical appliances, switching power supply, controllers and other electrical equipment are prohibited to be installed on the surface of combustible materials;

2) Switching power supply and various controllers must be installed in the box of the metal shell in accordance with the requirements of the construction design specification, and shall not be buried in the ground and wall;

3) The cable and wire connectors of lamps and lanterns should be connected with terminals or dipping tin, and waterproof treatment;

4) In order to ensure the installation strength and prevent rain corrosion, the mounting bracket and fixing screws of the lamp should be made of stainless steel or aluminum alloy;

5) Layout of lamps, pipelines and electrical equipment shall not affect fire safety evacuation and rescue;

6) The exterior lamp shell color should be in harmony with the surface color of the installation part; External facade night lighting lamps and wiring should be not exposed, not easy to touch, the main facade is strictly prohibited exposure;

7) All power supply and distribution lines and control lines must be laid through thick-walled hot-dip galvanized steel pipes or metal grooves according to the requirements of the design specifications. No bare wires can be found anywhere, nor can they be directly buried in the ground or walls;

8) The construction shall meet the local standards and construction specifications of the project site;

　　節能措施及效果

　　項目設計：燈光為建筑賦能，用最合適的燈具，做最匹配建筑形態的照明。
產品運用：貼合綠色照明，每款燈型確保功率合適，無運用大功率燈具；同時極大地減少了視覺上的曝光點及過度照明。
控制模式：采用成熟的時間控制模塊，將建筑照明分為夜晚和深夜兩種模式（夜晚燈光狀態全開深夜只保留基礎功能），照明內消耗功率低；
Project design: lighting empowers the building. Use the most appropriate lamps and lanterns to make the lighting that best matches the architectural form.

Product application: fit green lighting, each lamp type to ensure appropriate power, no use of high-power lamps; It also greatly reduces visual exposure points and overillumination.

Control mode: a mature time control module is adopted to divide the lighting of the building into two modes: night and late night (the lighting is fully switched on at night and only the basic functions are retained at night). The power consumption in lighting is low.

　　照明設計創新點

　　1照明設計的思路的轉變：依據建筑的設計邏輯，通過燈光語言，創作出獨特的夜景形象，將建筑夜景融入到整個城市中去。巧妙設置空間的光影關系，塑造沉浸式情感體驗。將海上明月打造成為情感式居住社區。
2照明實施節點的優化：借助幕墻預留開孔，橋借鋁板后側支撐龍骨，設置燈具安裝槽，槽外用亞克力進行裝飾封板，這樣保證建筑外觀白景下，將燈具完全隱藏，夜景下，燈光從槽內均勻照射，借助控制系統，形成海綿波光粼粼的感覺，真正地做到了建筑形象與光影融為一體。
1. Change of thinking of lighting design: according to the design logic of architecture, create a unique night scene image through lighting language, and integrate the night scene of architecture into the whole city. The light and shadow relationship of the space is skillfully set to create an immersive emotional experience. The sea moon will be built into an emotional residential community.

Reserve 2 lighting node optimization: with the help of a curtain wall hole, bridge by aluminum plate back support keel, set up the lamps and lanterns installation groove, groove external use acrylic decorative boards, so that ensure the building exterior Bai Jing, lamps and lanterns is completely hidden, at night, the lights a uniform light, groove by the control system, the formation of sponge sparkling feeling, really done building image combined with light and shadow.

　　項目實際運行評價

　　我司于2019年12月開始關于海上明月示范區項目售樓處建筑泛光設計工作，現階段售樓處已投入使用，滿足運營需求。
Our company started the flood light design work of the sales office of the Marine Bright Moon Demonstration Zone project in December 2019. At present, the sales office has been put into use to meet the operational needs.

　　獲獎情況

　　申報單位

　　公司成立十年以來，由鄭志偉先生領銜二十余位頂尖團隊，致力于光環境設計與研究。以國際視野和世界領先的燈光技術方案，創造極具視覺藝術及商業價值的光影作品。
專注于城市地標、商業綜合體、星級酒店、文旅小鎮、城市景觀等全球精品項目燈光設計，光影國際是萬達、恒大、泰禾、佳兆業等眾多地產的優秀合作伙伴，設計了如青島2008迎奧城市夜景、重慶江北區城市夜景、天津萬達中心、北京合生匯、成都銀泰城、恒大海花島、廣州融創主題樂園、深圳佳兆業國際主題樂園等眾多國內知名項目。光影國際參與并制定了萬達室內樂園基礎照明設計標準、萬達A-02，B02，B03，B-02，B-04BIM標準、光之變革美術館篇照明質量評估方法與體系研究、博物館照明設計標準等。作品屢獲國際、國內眾多大獎，致力于打造中國第一燈光設計品牌。

Since the establishment of the company ten years ago, Mr. Zheng Zhiwei led more than 20 top team, committed to the light environment design and research. With the international vision and the worlds leading lighting technology solutions, to create great visual art and commercial value of light and shadow works.

Focused on the city landmarks, commercial complexes, star hotel, tour town, urban landscape, such as global high-quality goods project lighting design, lighting, Evergrande, taihe, wanda international is jia zhaoye numerous excellent partner of real estate, such as design such as Qingdao 2008 to meet the urban night scene, night at chongqing jiangbei city, tianjin wanda center, Beijing, chengdu Yintai connation remit city, constant melting sea island, guangzhou a theme park, shenzhen jia zhaoye international theme park, and many other famous domestic projects. Lighting International participated in and formulated basic lighting design standards for Wanda Indoor Park, Wanda A-02, B02, B03, B-02, B-04BIM standards, research on lighting quality evaluation methods and systems for the Light Revolution Museum, and lighting design standards for museums, etc. Works have won many international and domestic awards, is committed to building Chinas first lighting design brand.